From: Sebastian Kapfer <email address hidden>
Date: Tue, 15 Dec 2009 08:39:50 -0800
Subject: [PATCH] Input: ALPS - add interleaved protocol support (Dell E6x00 series)

commit 1d9f26262aef6d63ff65eba0fd5f1583f342b69b upstream

Properly handle version of the protocol where standard PS/2 packets
from trackpoint are stuffed into middle (byte 3-6) of the standard
ALPS packets when both the touchpad and trackpoint are used together.

The patch is based on work done by Matthew Chapman and additional
research done by David Kubicek and Erik Osterholm:

	https://bugs.launchpad.net/ubuntu/+source/linux/+bug/296610

Many thanks to David Kubicek for his efforts in researching fine points
of this new version of the protocol, especially interaction between pad
and stick in these models.

Signed-off-by: Sebastian Kapfer <email address hidden>
Signed-off-by: Dmitry Torokhov <email address hidden>
---

Cherrypick to 2.6.31 by Andy Isaacson <email address hidden>.  Tested on
Dell E4300.

 drivers/input/mouse/alps.c |  252 +++++++++++++++++++++++++++++++++++++++-----
 drivers/input/mouse/alps.h |    1 +
 2 files changed, 228 insertions(+), 25 deletions(-)

diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 5547e24..b172bef 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -5,6 +5,7 @@
  * Copyright (c) 2003-2005 Peter Osterlund <email address hidden>
  * Copyright (c) 2004 Dmitry Torokhov <email address hidden>
  * Copyright (c) 2005 Vojtech Pavlik <email address hidden>
+ * Copyright (c) 2009 Sebastian Kapfer <email address hidden>
  *
  * ALPS detection, tap switching and status querying info is taken from
  * tpconfig utility (by C. Scott Ananian and Bruce Kall).
@@ -35,6 +36,8 @@
 #define ALPS_OLDPROTO	0x10
 #define ALPS_PASS	0x20
 #define ALPS_FW_BK_2	0x40
+#define ALPS_PS2_INTERLEAVED	0x80	/* 3-byte PS/2 packet interleaved with
+					   6-byte ALPS packet */
 
 static const struct alps_model_info alps_model_data[] = {
 	{ { 0x32, 0x02, 0x14 },	0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
@@ -55,7 +58,9 @@ static const struct alps_model_info alps_model_data[] = {
 	{ { 0x20, 0x02, 0x0e },	0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* XXX */
 	{ { 0x22, 0x02, 0x0a },	0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },
 	{ { 0x22, 0x02, 0x14 }, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */
-	{ { 0x62, 0x02, 0x14 }, 0xcf, 0xcf, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude E6500 */
+	/* Dell Latitude E5500, E6400, E6500, Precision M4400 */
+	{ { 0x62, 0x02, 0x14 }, 0xcf, 0xcf,
+		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
 	{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FW_BK_1 },		  /* Dell Vostro 1400 */
 };
 
@@ -66,20 +71,88 @@ static const struct alps_model_info alps_model_data[] = {
  */
 
 /*
- * ALPS abolute Mode - new format
+ * PS/2 packet format
+ *
+ * byte 0:  0    0 YSGN XSGN    1    M    R    L
+ * byte 1: X7   X6   X5   X4   X3   X2   X1   X0
+ * byte 2: Y7   Y6   Y5   Y4   Y3   Y2   Y1   Y0
+ *
+ * Note that the device never signals overflow condition.
+ *
+ * ALPS absolute Mode - new format
  *
  * byte 0:  1    ?    ?    ?    1    ?    ?    ?
  * byte 1:  0   x6   x5   x4   x3   x2   x1   x0
- * byte 2:  0   x10  x9   x8   x7    ?  fin  ges
+ * byte 2:  0  x10   x9   x8   x7    ?  fin  ges
  * byte 3:  0   y9   y8   y7    1    M    R    L
  * byte 4:  0   y6   y5   y4   y3   y2   y1   y0
  * byte 5:  0   z6   z5   z4   z3   z2   z1   z0
  *
+ * Dualpoint device -- interleaved packet format
+ *
+ * byte 0:    1    1    0    0    1    1    1    1
+ * byte 1:    0   x6   x5   x4   x3   x2   x1   x0
+ * byte 2:    0  x10   x9   x8   x7    0  fin  ges
+ * byte 3:    0    0 YSGN XSGN    1    1    1    1
+ * byte 4:   X7   X6   X5   X4   X3   X2   X1   X0
+ * byte 5:   Y7   Y6   Y5   Y4   Y3   Y2   Y1   Y0
+ * byte 6:    0   y9   y8   y7    1    m    r    l
+ * byte 7:    0   y6   y5   y4   y3   y2   y1   y0
+ * byte 8:    0   z6   z5   z4   z3   z2   z1   z0
+ *
+ * CAPITALS = stick, miniscules = touchpad
+ *
  * ?'s can have different meanings on different models,
  * such as wheel rotation, extra buttons, stick buttons
  * on a dualpoint, etc.
  */
 
+static bool alps_is_valid_first_byte(const struct alps_model_info *model,
+				     unsigned char data)
+{
+	return (data & model->mask0) == model->byte0;
+}
+
+static void alps_report_buttons(struct psmouse *psmouse,
+				struct input_dev *dev1, struct input_dev *dev2,
+				int left, int right, int middle)
+{
+	struct alps_data *priv = psmouse->private;
+	const struct alps_model_info *model = priv->i;
+
+	if (model->flags & ALPS_PS2_INTERLEAVED) {
+		struct input_dev *dev;
+
+		/*
+		 * If shared button has already been reported on the
+		 * other device (dev2) then this event should be also
+		 * sent through that device.
+		 */
+		dev = test_bit(BTN_LEFT, dev2->key) ? dev2 : dev1;
+		input_report_key(dev, BTN_LEFT, left);
+
+		dev = test_bit(BTN_RIGHT, dev2->key) ? dev2 : dev1;
+		input_report_key(dev, BTN_RIGHT, right);
+
+		dev = test_bit(BTN_MIDDLE, dev2->key) ? dev2 : dev1;
+		input_report_key(dev, BTN_MIDDLE, middle);
+
+		/*
+		 * Sync the _other_ device now, we'll do the first
+		 * device later once we report the rest of the events.
+		 */
+		input_sync(dev2);
+	} else {
+		/*
+		 * For devices with non-interleaved packets we know what
+		 * device buttons belong to so we can simply report them.
+		 */
+		input_report_key(dev1, BTN_LEFT, left);
+		input_report_key(dev1, BTN_RIGHT, right);
+		input_report_key(dev1, BTN_MIDDLE, middle);
+	}
+}
+
 static void alps_process_packet(struct psmouse *psmouse)
 {
 	struct alps_data *priv = psmouse->private;
@@ -89,18 +162,6 @@ static void alps_process_packet(struct psmouse *psmouse)
 	int x, y, z, ges, fin, left, right, middle;
 	int back = 0, forward = 0;
 
-	if ((packet[0] & 0xc8) == 0x08) {   /* 3-byte PS/2 packet */
-		input_report_key(dev2, BTN_LEFT,   packet[0] & 1);
-		input_report_key(dev2, BTN_RIGHT,  packet[0] & 2);
-		input_report_key(dev2, BTN_MIDDLE, packet[0] & 4);
-		input_report_rel(dev2, REL_X,
-			packet[1] ? packet[1] - ((packet[0] << 4) & 0x100) : 0);
-		input_report_rel(dev2, REL_Y,
-			packet[2] ? ((packet[0] << 3) & 0x100) - packet[2] : 0);
-		input_sync(dev2);
-		return;
-	}
-
 	if (priv->i->flags & ALPS_OLDPROTO) {
 		left = packet[2] & 0x10;
 		right = packet[2] & 0x08;
@@ -136,18 +197,13 @@ static void alps_process_packet(struct psmouse *psmouse)
 		input_report_rel(dev2, REL_X,  (x > 383 ? (x - 768) : x));
 		input_report_rel(dev2, REL_Y, -(y > 255 ? (y - 512) : y));
 
-		input_report_key(dev2, BTN_LEFT, left);
-		input_report_key(dev2, BTN_RIGHT, right);
-		input_report_key(dev2, BTN_MIDDLE, middle);
+		alps_report_buttons(psmouse, dev2, dev, left, right, middle);
 
-		input_sync(dev);
 		input_sync(dev2);
 		return;
 	}
 
-	input_report_key(dev, BTN_LEFT, left);
-	input_report_key(dev, BTN_RIGHT, right);
-	input_report_key(dev, BTN_MIDDLE, middle);
+	alps_report_buttons(psmouse, dev, dev2, left, right, middle);
 
 	/* Convert hardware tap to a reasonable Z value */
 	if (ges && !fin) z = 40;
@@ -188,25 +244,168 @@ static void alps_process_packet(struct psmouse *psmouse)
 	input_sync(dev);
 }
 
+static void alps_report_bare_ps2_packet(struct psmouse *psmouse,
+					unsigned char packet[],
+					bool report_buttons)
+{
+	struct alps_data *priv = psmouse->private;
+	struct input_dev *dev2 = priv->dev2;
+
+	if (report_buttons)
+		alps_report_buttons(psmouse, dev2, psmouse->dev,
+				packet[0] & 1, packet[0] & 2, packet[0] & 4);
+
+	input_report_rel(dev2, REL_X,
+		packet[1] ? packet[1] - ((packet[0] << 4) & 0x100) : 0);
+	input_report_rel(dev2, REL_Y,
+		packet[2] ? ((packet[0] << 3) & 0x100) - packet[2] : 0);
+
+	input_sync(dev2);
+}
+
+static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse)
+{
+	struct alps_data *priv = psmouse->private;
+
+	if (psmouse->pktcnt < 6)
+		return PSMOUSE_GOOD_DATA;
+
+	if (psmouse->pktcnt == 6) {
+		/*
+		 * Start a timer to flush the packet if it ends up last
+		 * 6-byte packet in the stream. Timer needs to fire
+		 * psmouse core times out itself. 20 ms should be enough
+		 * to decide if we are getting more data or not.
+		 */
+		mod_timer(&priv->timer, jiffies + msecs_to_jiffies(20));
+		return PSMOUSE_GOOD_DATA;
+	}
+
+	del_timer(&priv->timer);
+
+	if (psmouse->packet[6] & 0x80) {
+
+		/*
+		 * Highest bit is set - that means we either had
+		 * complete ALPS packet and this is start of the
+		 * next packet or we got garbage.
+		 */
+
+		if (((psmouse->packet[3] |
+		      psmouse->packet[4] |
+		      psmouse->packet[5]) & 0x80) ||
+		    (!alps_is_valid_first_byte(priv->i, psmouse->packet[6]))) {
+			dbg("refusing packet %x %x %x %x "
+			    "(suspected interleaved ps/2)\n",
+			    psmouse->packet[3], psmouse->packet[4],
+			    psmouse->packet[5], psmouse->packet[6]);
+			return PSMOUSE_BAD_DATA;
+		}
+
+		alps_process_packet(psmouse);
+
+		/* Continue with the next packet */
+		psmouse->packet[0] = psmouse->packet[6];
+		psmouse->pktcnt = 1;
+
+	} else {
+
+		/*
+		 * High bit is 0 - that means that we indeed got a PS/2
+		 * packet in the middle of ALPS packet.
+		 *
+		 * There is also possibility that we got 6-byte ALPS
+		 * packet followed  by 3-byte packet from trackpoint. We
+		 * can not distinguish between these 2 scenarios but
+		 * becase the latter is unlikely to happen in course of
+		 * normal operation (user would need to press all
+		 * buttons on the pad and start moving trackpoint
+		 * without touching the pad surface) we assume former.
+		 * Even if we are wrong the wost thing that would happen
+		 * the cursor would jump but we should not get protocol
+		 * desynchronization.
+		 */
+
+		alps_report_bare_ps2_packet(psmouse, &psmouse->packet[3],
+					    false);
+
+		/*
+		 * Continue with the standard ALPS protocol handling,
+		 * but make sure we won't process it as an interleaved
+		 * packet again, which may happen if all buttons are
+		 * pressed. To avoid this let's reset the 4th bit which
+		 * is normally 1.
+		 */
+		psmouse->packet[3] = psmouse->packet[6] & 0xf7;
+		psmouse->pktcnt = 4;
+	}
+
+	return PSMOUSE_GOOD_DATA;
+}
+
+static void alps_flush_packet(unsigned long data)
+{
+	struct psmouse *psmouse = (struct psmouse *)data;
+
+	serio_pause_rx(psmouse->ps2dev.serio);
+
+	if (psmouse->pktcnt == 6) {
+
+		/*
+		 * We did not any more data in reasonable amount of time.
+		 * Validate the last 3 bytes and process as a standard
+		 * ALPS packet.
+		 */
+		if ((psmouse->packet[3] |
+		     psmouse->packet[4] |
+		     psmouse->packet[5]) & 0x80) {
+			dbg("refusing packet %x %x %x "
+			    "(suspected interleaved ps/2)\n",
+			    psmouse->packet[3], psmouse->packet[4],
+			    psmouse->packet[5]);
+		} else {
+			alps_process_packet(psmouse);
+		}
+		psmouse->pktcnt = 0;
+	}
+
+	serio_continue_rx(psmouse->ps2dev.serio);
+}
+
 static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
 {
 	struct alps_data *priv = psmouse->private;
+	const struct alps_model_info *model = priv->i;
 
 	if ((psmouse->packet[0] & 0xc8) == 0x08) { /* PS/2 packet */
 		if (psmouse->pktcnt == 3) {
-			alps_process_packet(psmouse);
+			alps_report_bare_ps2_packet(psmouse, psmouse->packet,
+						    true);
 			return PSMOUSE_FULL_PACKET;
 		}
 		return PSMOUSE_GOOD_DATA;
 	}
 
-	if ((psmouse->packet[0] & priv->i->mask0) != priv->i->byte0)
+	/* Check for PS/2 packet stuffed in the middle of ALPS packet. */
+
+	if ((model->flags & ALPS_PS2_INTERLEAVED) &&
+	    psmouse->pktcnt >= 4 && (psmouse->packet[3] & 0x0f) == 0x0f) {
+		return alps_handle_interleaved_ps2(psmouse);
+	}
+
+	if (!alps_is_valid_first_byte(model, psmouse->packet[0])) {
+		dbg("refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n",
+		    psmouse->packet[0], model->mask0, model->byte0);
 		return PSMOUSE_BAD_DATA;
+	}
 
 	/* Bytes 2 - 6 should have 0 in the highest bit */
 	if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 6 &&
-	    (psmouse->packet[psmouse->pktcnt - 1] & 0x80))
+	    (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
+		dbg("refusing packet[%i] = %x\n",
+		    psmouse->pktcnt - 1, psmouse->packet[psmouse->pktcnt - 1]);
 		return PSMOUSE_BAD_DATA;
+	}
 
 	if (psmouse->pktcnt == 6) {
 		alps_process_packet(psmouse);
@@ -441,6 +640,7 @@ static void alps_disconnect(struct psmouse *psmouse)
 	struct alps_data *priv = psmouse->private;
 
 	psmouse_reset(psmouse);
+	del_timer_sync(&priv->timer);
 	input_unregister_device(priv->dev2);
 	kfree(priv);
 }
@@ -457,6 +657,8 @@ int alps_init(struct psmouse *psmouse)
 		goto init_fail;
 
 	priv->dev2 = dev2;
+	setup_timer(&priv->timer, alps_flush_packet, (unsigned long)psmouse);
+
 	psmouse->private = priv;
 
 	if (alps_hw_init(psmouse, &version))
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index 4bbddc9..4b60241 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -23,6 +23,7 @@ struct alps_data {
 	char phys[32];			/* Phys */
 	const struct alps_model_info *i;/* Info */
 	int prev_fin;			/* Finger bit from previous packet */
+	struct timer_list timer;
 };
 
 #ifdef CONFIG_MOUSE_PS2_ALPS
-- 
1.6.6